To connect IX90 to a
power source
NOTE
Loading a Paper
Roll in the
Printer
CAUTION
To install a paper roll
1
Connect the power cable
Connecting to a Power Source
Figure 5
2
Plug the regional power cable to the power source (wall socket).
Your IX90 includes a battery and should always be connected to its power source
for daily usage.
Install a paper roll before you can start the transaction that requires a receipt. The
printer uses a roll of 40 mm, single-ply, thermal-sensitive paper.
A pink out-of-paper indicator line appears on the edge of the paper before the
end of the roll. After this line appears there will be paper to perform only one more
transaction.
•
Poor-quality paper can jam the printer and create excessive paper dust. To
place an order for high-quality Verifone paper roll, refer to
Documentation
section.
•
Store thermal paper in a dry, dark area. Handle thermal paper carefully:
impact, friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
•
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
1
Open the paper door of the printer by pulling downwards.
2
Remove any partial roll of paper in the tray.
3
Pull the paper past the printer door.
to the IO hub.
PWR159-002-01-B
D
EVICE
Loading a Paper Roll in the Printer
Accessories and
IX90 UX700 I
G
NSTALLATION
S
ETUP
21
UIDE