Table of Contents
Advertisement
flashing off and on, indicating that there is no paper in the
printer.)
Caution: The AC adapter on the Omni 3210 power pack is
designed to ensure your personal safety and to be compatible
with this equipment. Please follow these guidelines:
•
Do not use the adapter in a high moisture environment.
Never touch the adapter when your hands or feet are wet.
•
Allow adequate ventilation around the adapter. Avoid
locations with restricted airflow.
•
Connect the adapter to a proper power source. The voltage
and grounding requirements are found on the product case
and/or packaging.
•
Do not use the adapter if the cord becomes damaged.
•
Do not attempt to service the adapter. There are no
serviceable parts inside. Replace the unit if it is damaged
or exposed to excess moisture.
Caution: Disconnecting power during a transaction may cause
transaction data files that are not yet stored in terminal memory
to be lost.
Step 7: Install a Paper Roll in the Printer
A fast, quiet thermal printer is built in to the Omni 3210.
Because the printer receives power directly from the terminal,
there are no additional cables to connect (see Figure 16).
Before you can process transactions that require a receipt or
record, you must install a roll of thermal-sensitive paper in the
printer. This procedure is described in "Installing a Paper Roll"
on page 27.
Omni 3210 Installation Guide
25
Advertisement
Table of Contents
