BHT-1300B Series
3.1 Reading Barcodes
Follow the procedure below to scan barcodes.
1.
Turn the BHT power ON.
2.
Press the trigger switch.
The BHT emits a guide marker (laser light) and the light for reading.
Point
Hold the BHT close to the code to align the guide marker.
When the BHT has read the code successfully, the indicator LED will illuminate in blue.
Point
Note
32
The trigger switch is assigned to magic
keys M3 and M4 when shipped from the
factory.
The code reading method may differ depending on
the application. Select the most appropriate in
accordance with the instructions provided in the
application User's Manual.
If required, clean dirty labels before reading.
It may not be possible to perform reading in direct sunlight.
If the code is on a curved surface, flatten the label surface and read it again.
If the code reading window is pulled away from the code, the readable code range will
become narrower than that of the light emission.
Power key
Guide marker