Setting Up The Slave Station - Denso BHT-1306BWB User Manual

BHT-1300B series


Setting up the slave station

1.
Select "4: SLAVE" at the SET BLUETOOTH menu and then press
the ENT key.
The current settings are displayed.
[1: PASSKEY]:
[2: TIMEOUT]:
[3: SECURITY]: Sets up the security mode for the slave station.
Press and hold the BS/C key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to select
the menu and then press the ENT key.
Entry mode is activated and the cursor is displayed.
To set up the "3: SECURITY", use the cursor keys ([◄] [►]) to highlight and set the desired setting.
3.
Use the numeric and period (.) keys to enter the desired value.
"PASSKEY":
"TIMEOUT":
For the Bluetooth
®
"Bluetooth wireless communications".
To switch the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key
or press the SF and BS/C keys simultaneously.
4.
Press the ENT key.
5.
Press and hold the BS/C key to return to the SET BLUETOOTH menu.
176
®
Sets up the Bluetooth passkey for the slave station.
Sets up the timeout limit in seconds.
Up to 16 characters
Valid Range: 1-255, Default : 255 seconds
®
passkey and the security mode details, refer to Chapter 5 "Communication" – 5.3