Denso BHT-1200 Series Operator's Manual
  1. Manuals
  2. Brands
  3. Denso Manuals
  4. Touch terminals
  5. BHT-1200 Series
  6. Operator's manual

Denso BHT-1200 Series Operator's Manual

2d code handy terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ＢＨＴ-12００ Series
Operator's Guide
2D Code Handy Terminal
BHT-1281QULWB-CE
Thank you for using the DENSO WAVE 2D Code Handy Terminal.
Please read this manual thoroughly prior to operation to ensure full use of the product's functionality,
and store safely in a convenient location for quick reference even after reading.
This manual contains only the basic details required for operation.
Please refer to the User's Manual for further details on general operation.
The User's Manual can be downloaded free of charge from the DENSO WAVE Web site (QBdirect).
http://www.qbdirect.net/
496487-XXXX

Advertisement

Table of Contents
loading

Related Manuals for Denso BHT-1200 Series

Summary of Contents for Denso BHT-1200 Series

  • Page 1 This manual contains only the basic details required for operation. Please refer to the User’s Manual for further details on general operation. The User’s Manual can be downloaded free of charge from the DENSO WAVE Web site (QBdirect). http://www.qbdirect.net/ 496487-XXXX...

  • Page 2: About This Manual

    (3) The modification of DENSO WAVE’s products by parties other than DENSO WAVE.  If it is judged by DENSO WAVE that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period.

  • Page 3: Usage Precautions

    Usage Precautions Usage environment restrictions  Do not use the BHT where it may be exposed to fire, high temperatures, or direct sunlight. (Failure to observe this may result in damage, overheating, explosion, or fire.) * When the BHT is stored in a high-temperature, high-humidity environment of 50 to 60C, leave to sit in a location at room temperature and normal humidity for at least 1 day prior to use.

  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Meaning of Symbols Alerts you to those conditions which could cause serious WARNING bodily injury or death if the instructions are not followed correctly. Alerts you to those conditions which could cause minor CAUTION bodily injury or substantial property damage if the instructions are not followed correctly.

  • Page 5: To System Designers

    To System Designers: When introducing BHT in those systems that could affect human lives (e.g., medicines management system), develop applications carefully through redundancy and safety design hich avoids the feasibility of affecting human lives even if a data error occurs. Handling the BHT Incorrect handling of the BHT could cause electric shock, impaired vision, skin problems, injury, burns and generation of heat and smoke from the BHT.
  • Page 6 The 2D Code Handy Terminal uses a laser light for indicating the scanning range. The intensity of the laser light is too low to inflict bodily injury. However, do not stare into beam. You must observe the following precautions when handling the BHT equipped with laser light.

  • Page 7: Wireless Equipment

    3. If other problems arise due to reasons such as electromagnetic interference from this device to a specified low-power wireless station being used for mobile identification, please contact DENSO WAVE through QBdirect. ● Requests to system designers ・Communication may not be possible depending on the environment in which the device is being used.

  • Page 8: Components And Functions

    Components and Functions BHT-1281QULWB-CE Indicator LED When succeeding in the reading of the barcode, illuminates in blue.Illuminates in red during charging, and turns green on completion of charging. LCD (with Touch panel) Display characters and graphic patterns. Data may be entered by tapping the screen directly with the stylus.
  • Page 9 Key pad The BHT key functions can be set at user programs. The diagram below shows an example of settings for each key function.
  • Page 10 Name Function and Description ① Tab key Used to enter a tab character. ・The SF and ENT key functions can be ② assigned to these magic keys by making settings SYSTEM M1, M2, M3 MENU. ③ magic keys ・Character strings can be assigned at user programs.

  • Page 11: Input Method

    Input Method Using the Stylus The BHT liquid crystal display (LCD) is a touch screen. Buttons, menus and so displayed on the screen can be selected using the stylus provided. Touch Screen Operation Select the LCD touch screen buttons and menus and so on using the stylus provided. Action Description This involves tapping the touch screen once.

  • Page 12: Proper Care Of The Bht

    Proper Care of the BHT Make sure to turn OFF the BHT before cleaning. ● Terminal dirt on the BHT and battery Periodically wipe any dirt from the terminals of the BHT and battery with a cotton swab or similar soft object.
  • Page 13 Step 1 Charging The battery is not charged when purchased and must therefore be charged prior to use. The following Cradle can be used with the BHT. Cradle: CU-1211, CU-1233 It takes about 9 hours to charge the batteries (when both the batteries in the BHT main body and in the grip are mounted).
  • Page 14 Caution when Installing the BHT to the CU ・Place the BHT on the CU carefully. Insert the BHT along the guides at the both sides of the CU. ・If the BHT does not fit into the guides smoothly, take it off and confirm that there is no foreign object which blocks the insertion.

  • Page 15: Step 2 Turning On The Power

    Step 2 Turning ON the Power It is necessary to perform touch screen calibration and set the date and time when turning ON the BHT power for the first time. Press the power key to turn ON the BHT power. The calibration screen should then display.

  • Page 16: Normal Power Off

    Turning the Power OFF Use one of the following three methods to turn OFF the BHT power. (1) Normal power OFF Press the power key. The BHT power turns OFF after the message right displays. Point Do not remove the battery while the message on the right is displayed. Failure to observe this may result in data stored in the BHT being lost.
  • Page 17 Reading/Writing RF Tags Read and write RF tags in accordance with the procedures given below. Press the power key to turn the BHT power ON. Power Key The red LED is turned ON. Select System Properties of BhtShell from the Desktop menu to activate RFID Menu.

  • Page 18: Scanning Codes

    If the BHT is used near other radio devices such Do not use the BHT used near other radio as a personal radio station or an amateur radio devices such as a personal radio station or station, it may not be able to read/write RF tags. an amateur radio station.

  • Page 19: When Unable To Successfully Read Codes

    When Unable to Successfully Read Codes Cause Countermeasure Change the BHT scanning angle and try again. When the light is focused on the printed Specular surface of the code from directly above, reflection the BHT may not read the code due to specular reflection.

  • Page 20: Replacing The Batteries

    Replacing the Batteries Press the power key to turn OFF the BHT power. The screen on the right displays. Shutdown In progress Point Do not remove Do not remove the battery until the power turns OFF and the screen display clears. The battery.
  • Page 21 Close the battery cover and restore the battery cover lock to the original position. Replacement of the battery in the grip Slide the battery cover lock as pushing it and remove the battery cover. Remove the battery.
  • Page 22 Check the protrusions of a new battery and Protrusion mount the battery in the arrow direction. Close the battery cover, and restore the battery cover lock to the original position as pushing it.

  • Page 23: Using The Bht After Long Non-Use

    Using the BHT after Long Non-Use Data stored in the BHT may be lost or damaged and the calendar clock may stop if the BHT is left unused for a long period of time. ・Keep a backup copy of important or critical information. ・Reset the calendar clock if it is stopped.

  • Page 24: Turning On/Off The Backlight

    Turning ON/OFF the Backlight To turn the backlight ON or OFF, hold down the Shift key and press the M3 Key. Hold down the Shift key and press the M3 Key. Backlight OFF or dim (backlight function enabled) Press any key or tap If no key is the touch screen.

  • Page 25: Full Reset Method

    Resetting and Full Resetting Reset Reset the BHT in the following cases.  The BHT makes no response to entry from the touch screen or keys.  Programs in the BHT malfunction for some unknown reason. Reset Method With the BHT power ON, press the reset key combination (BKSP + Right Trigger + Power).

  • Page 26: Memory Contents After Reset/Full Reset

    Memory Contents after Reset/Full Reset Reset Full Reset Data in the “FLASH” folder Data retained Data retained (on-board FLASH memory) Data in the “Storage Card” folder Data retained Data retained (microSD Card) Data in other folders Data retained Data erased (Note) Contents of the Registry Data retained...
  • Page 27 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. <Information> Company Name : DENSO PRODUCTS AND SERVICES AMERICAS, INC. Address : 3900 Via Oro Avenue, Long Beach, California 90810, U.S.A. Tel : +1-310-834-6352 IC Regulation (for Canada) This device complies with Industry Canada licence-exempt RSS standard(s).
  • Page 28 FCC/IC Radiation Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
  • Page 32 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi 470-2297, Japan http://www.denso-wave.com/ This manual uses recycled paper. 본 인쇄물은 재생지를 활용합니다. 这个印刷品正使用再生纸。...

This manual is also suitable for:

Bht-1281qulwb-ce

Table of Contents