Scanning Barcodes - Denso BHT-1170BWB-CE User Manual

BHT-1170BWB-CE / BHT-1171BWB-CE

3.1 Scanning Barcodes

Follow the procedure below to scan barcodes.
1.
Turn the BHT power ON.
− Note −
Scanning may be unsuccessful immediately
after turning the BHT power on.
At the same time, beeping sound may be lost
sometimes when reading etc.
2.
Press the trigger key.
The BHT emits an illumination LED.
3.
Hold the BHT close to the barcode to align the
illumination LED.
When the BHT has read the barcode successfully,
the indicator LED will illuminate in blue.
Barcodes can be read also by pressing the Scan key.
− Point −
The barcode scanning method may differ
depending on the application. Perform
scanning
instructions provided in the application
User's Manual.
− Note −
If required, clean dirty labels before scanning.
It may not be possible to perform scanning in direct sunlight.
If the barcode is on a curved surface, perform scanning in the center of the illumination LED
emission range.
If the barcode reading window is pulled away from the barcode, the scannable barcode range will
become narrower than that of the illumination LED emission.
Do not use the BHT in the vicinity of radio equipment. This may cause the BHT to malfunction.
28
in accordance with
Power key
Illumination light
the
Blue LED ON