Denso BHT-1306BWB User Manual page 29

4.
Slide the battery cartridge cover release button (1) in the direction indicated by the arrow and
remove the battery cartridge cover (2).
5.
Check the battery cartridge terminals and indication on the BHT unit, and then insert the
cartridge in the direction indicated by the arrow.
Do not use battery cartridges other than
 Point 
that specified by DENSO WAVE.
6.
Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock
the cover in position. Press the battery cover into place until a click is heard.
Barcode Handy Terminal
Terminals
17