Setting The Auto-Start Execution Program - Denso BHT-1306BWB User Manual

[1] Setting the auto-start execution program

Use the following procedure to set the auto-start execution program.
1.
Select "1: EXECUTE PROGRAM" at the SET SYSTEM menu and
then press the ENT key.
The SET EXECUTE PROGRAM menu screen on the right is displayed.
The highlighted program will be the program currently set as the auto-start
execution program.
2.
Use the cursor keys ([▲] [▼]) to highlight the target program.
3.
Press the ENT key.
The selected program will be set as the auto-start execution program.
Press the BS/C key to return to the SET SYSTEM menu.
The screen on the right is displayed if no programs have been downloaded.
Press the BS/C key to return to the SET SYSTEM menu.
Barcode Handy Terminal
81