EAN/UPC 3/3
(UPC-E set)
"1: READING":
Enable/Disable UPC-E.
"2: 1ST CHARACTER":
"3: 2ND CHARACTER":
Allocate "?, 0–9" to the first and second characters of UPC-E (country flags).
If "0–9" is allocated at the menu, limitation is set for the BHT to read only when the allocated numeric
characters match the first and second numeric characters of UPC-E. The BHT will carry on reading
endlessly if "?" is allocated. (UPC-E add-on set)
"4: READING":
Enable/Disable UPC-E with add-on
"5: ONLY":
If this is set to ON, limitation is set for the BHT to read UPC-E with add-on only. If this is OFF, the
limitation is disabled.
"6: DIGIT":
"2&5":
Enable 2-digit or 5-digit add-on reading.
"2"
Enable 2-digit add-on reading.
"5"
Enable 5-digit add-on reading.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6]) to select the item to be set
and press the ENT key.
3.
Use the cursor keys ([ ] [ ]) to select settings value.
4.
Press the ENT key or BS/C key for the settings value to be valid and then return to the SET
BARCODE screen.
Barcode Handy Terminal
93