Denso BHT-1306BWB User Manual page 179

7.
Use the numerical keys to enter an ID and press the ENT key.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key,
or press the SF key and BS/C key simultaneously.
8.
Use the cursor keys ([▲] [▼]) or numerical key ([4]) to highlight [4: PASSWORD] and then press
the ENT key.
The mode changes to entry mode and the cursor is displayed.
9.
Use the numerical keys to enter a password and press the ENT key.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key,
or press the SF key and BS/C key simultaneously.
10.
Use the cursor keys ([▲] [▼]) or numerical key ([5]) to
highlight [5: ROOT CERT] and then press the ENT key.
The screen on the right is displayed.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message is displayed if no files exist.
11.
Use the cursor keys ([▲] [▼]) or numerical key ([6]) to highlight [6:
CLIENT CERT] and then press the ENT key.
The same screen as that for [5: ROOT CERT] is displayed.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message is displayed if no files exist.
12.
Press and hold the BS/C key to return to the SECURITY CONFIG menu.
13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right is displayed.
[1: CIPHER MODE]:
14.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
15.
Press the ENT key or BS/C key to return to the SECURITY CONFIG
menu.
Selects TKIP or AES.
Barcode Handy Terminal
167