Communication Test; Infrared Communication Test - Denso BHT-1306BWB User Manual

BHT-1300B series

[7] Communication test

Use the following procedure to perform a communication test.
1.
Select "7: COMMUNICATION" at the TEST menu and then press the
ENT key.
The TEST COMMUNICATION screen shown on the right is displayed.
"1: OPTICAL":
"2: COM2":
Refer to the following section for details of the above items.
Press and hold the BS/C key to return to the TEST menu.
 Infrared Communication Test
1.
Arrange two BHTs, one as a master station and the other as a slave
station (to be tested) with their IrDA interface ports facing each other
as illustrated below.
This test involves transmitting data from the test BHT and the master BHT
returning the data to the test BHT.
Master BHT
2.
Select "1: COM1" at the TEST menu and then press the ENT key.
The TEST COMMUNICATION screen on the right is displayed.
136
Performs an infrared communication test.
Perfroms a USB communication test.
Data
Max. 15 cm
Slave BHT
(to be tested)
TEST COMMUNICATION
1：COM1
2：COM2
TEST COMMUNICATION
< COM1 >
1：IrDA
2：Cradle