Setting The Operation Log - Denso BHT-1306BWB User Manual

[11] Setting the operation log

The BHT-1300 series is compliant with the BHT Manager software (host-side tool). The OPERATION
LOG sets wheter of not create log data that the BHT Manager collects.
For details, refer to the "BHT Manager User's Manual". The following explains only the operation of this
menu and an outline of the settings.
1.
Select "3: OPERATION LOG" from the SET SYSTEM Menu 2/2 and
then press the ENT key.
The OPERATION LOG settings menu will display.
The highlighted setting is the current setting.
2.
Use the cursor keys ([◄] [►]) to select each setting value, and then
press the ENT key.
"ON": An operation log file is created.
"OFF": An operation log file is not created.
3.
Press the ENT key.
The selected value will then be set.
Barcode Handy Terminal
ENT key
119