Denso BHT-1306BWB User Manual page 243

Message
After displaying this error
message, the BHT may start
a user program other than
the
execution program or display
the message "No execution
program loaded."
If this error occurs, the
warning tone beeps five
times.
The message is continuously
displayed.
The message is continuously
displayed.
BHT Response
Your settings made in
System Mode contain an
error.
preset auto-start
An error has occurred
during execution of
System Program.
An error has occurred
during execution of
System Program. The
application restarts from
the beginning.
An error has occurred
during execution of
System Program due to
the application. The
application restarts from
the beginning.
Barode Handy Terminal
Cause Countermeasure
Contact
administrator.
(If this error occurs, the
System Mode settings revert
to the factory defaults.)
Unload and reload the
battery cartridge, then turn
the BHT on.
If this error occurs
frequently, contact your
system administrator.
If this error occurs
frequently, contact your
system administrator.
Check the application.
your system
231