Ip Address Of Host Computer For Ping-Test; Echo Request Send Timing; Wireless Security Mode; Wireless Security Retry Interval For Non-Response - Denso BHT-1306BWB User Manual

IP address of host computer for ping-test

Data size of echo request
Echo request intervals
Timeout period for echo request
No. of echo requests to be sent

Echo request send timing

TCP/IP operation device
TCP/IP link layer
Transmission speed between BHT and CU
No. of retries for link establishment command to be sent
Link establishment command intervals
No. of retries for link release command to be sent
Link release command intervals
Link release period
Service Set ID (SSID) (Not possible to copy correctly if there is a space at the end.)
Power save mode for wireless module
Authentication system
WEP (Wired Equivalent Privacy) (enable/disable)
Maximum DHCP IP address acquisition wait time
Wireless method

Wireless security mode

Wireless security EAP authentication method
Wireless security encryption method
Wireless security root certificate filename
Wireless security EAP start time

Wireless security retry interval for non-response

Wireless security retry interval for authentication failure
Wireless security retry interval for authentication start failure
Wireless security retry count for authentication start failure
PPP authentication name
PPP authentication password
PPP authentication method
®
Bluetooth device name
Address of the emote device the BHT is connected to
Device detection time
No. of detected devices
®
Bluetooth passkey when the BHT is connected as a master
Communication timeout when the BHT is connected as a master
Communication timeout when the BHT is connected as a slave
Security mode when the BHT is connected as a master
Security mode when the BHT is connected as a slave
®
Bluetooth interface communication protocol option
Barcode Handy Terminal
79