Msdp Configuration Examples - HP FlexNetwork 7500 Series Configuration Manual

Task
Reset the TCP connection with an MSDP peer and
clear statistics for the MSDP peer.
Clear (S, G) entries in the SA cache.
Clear statistics for an MSDP peer without resetting
the TCP connection with the MSDP peer.

MSDP configuration examples

This section provides examples of configuring MSDP on switches.
PIM-SM inter-domain multicast configuration
Network requirements
As shown in
•
OSPF runs within AS 100 and AS 200 and BGP runs between them.
•
Each PIM-SM domain has at least one multicast source or receiver.
Set up MSDP peering relationships between the RPs in the PIM-SM domains to share multicast
source information among the PIM-SM domains.
Figure 56 Network diagram
Table 12 Interface and IP address assignment
Device
Switch A
Switch A
Figure 56:
Interface IP address
Vlan-int103 10.110.1.2/24
Vlan-int100 10.110.2.1/24
Command
reset msdp [ vpn-instance vpn-instance-name ]
peer [ peer-address ]
reset msdp [ vpn-instance vpn-instance-name ]
sa-cache [ group-address ]
reset msdp [ vpn-instance vpn-instance-name ]
statistics [ peer-address ]
Device Interface
Switch D Vlan-int104
Switch D Vlan-int300
162
IP address
10.110.4.2/24
10.110.5.1/24