Mld Snooping Configuration Task List - HP FlexNetwork 7500 Series Configuration Manual

MLD snooping configuration task list

Tasks at a glance
Configuring basic MLD snooping
•
(Required.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring MLD snooping port
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring the MLD snooping
•
(Optional.)
•
(Optional.)
Configuring parameters for MLD
•
(Optional.)
•
(Optional.)
Configuring MLD snooping
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring basic MLD snooping features
Before you configure basic MLD snooping features, complete the following tasks:
•
Configure VLANs.
•
Determine the MLD snooping version.
•
Determine the maximum number of MLD snooping forwarding entries.
•
Determine the MLD last listener query interval.
Enabling MLD snooping
When you enable MLD snooping, follow these guidelines:
•
You must enable MLD snooping globally before you can enable it for a VLAN.
•
MLD snooping configuration made in VLAN view takes effect only on the member ports in that
VLAN.
•
You can enable MLD snooping for the specified VLANs in MLD-snooping view or for a VLAN in
VLAN view. For a VLAN, the configuration in VLAN interface has the same priority as the
configuration in MLD-snooping view, and the most recent configuration takes effect.
features:
Enabling MLD snooping
Specifying an MLD snooping version
Setting the maximum number of MLD snooping forwarding entries
Setting the MLD last listener query interval
features:
Setting aging timers for dynamic ports
Configuring static ports
Configuring a port as a simulated member host
Enabling fast-leave processing
Disabling a port from becoming a dynamic router port
querier:
Enabling the MLD snooping querier
Configuring parameters for MLD general queries and responses
messages:
Configuring source IPv6 addresses for MLD messages
Setting the 802.1p priority for MLD messages
policies:
Configuring an IPv6 multicast group policy
Enabling IPv6 multicast source port filtering
Enabling dropping unknown IPv6 multicast data
Enabling MLD report suppression
Setting the maximum number of IPv6 multicast groups on a port
Enabling IPv6 multicast group replacement
231