HP FlexNetwork 7500 Series Configuration Manual page 270

Ip multicast
Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

VLAN 100: Total 4 neighbors.
FE80::1
Slots (0 in total):
Ports (1 in total):
GE1/0/1
FE80::2
Slots (0 in total):
Ports (1 in total):
GE1/0/2
FE80::3
Slots (0 in total):
Ports (1 in total):
GE1/0/3
FE80::4
Slots (0 in total):
Ports (1 in total):
GE1/0/4
The output shows that Router A, Router B, Router C, and Router D are IPv6 PIM snooping
neighbors.
# On Switch A, display IPv6 PIM snooping routing entries for VLAN 100.
[SwitchA] display pim-snooping ipv6 routing-table vlan 100
Total 2 entries.
FSM flag: NI-no info, J-join, PP-prune pending
VLAN 100: Total 2 entries.
(*, FF1E::101)
Upstream neighbor: FE80::1
Upstream Slots (0 in total):
Upstream ports (1 in total):
GE1/0/1
Downstream Slots (0 in total):
Downstream ports (1 in total):
GE1/0/3
Expires: 00:03:01, FSM: J
(*, FF2E::101)
Upstream neighbor: FE80::2
Upstream Slots (0 in total):
Upstream ports (1 in total):
GE1/0/2
Downstream Slots (0 in total):
Downstream ports (1 in total):
GE1/0/4
Expires: 00:03:01, FSM: J
The output shows that:
Switch A will forward the multicast data intended for IPv6 multicast group FF1E::101 to only
Router C.
(00:32:43)
(00:32:43)
(00:32:43)
(00:32:43)
260

Advertisement

Table of Contents
loading

Table of Contents