IGMP configuration task list
Tasks at a glance
Configuring basic IGMP
•
(Required.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Adjusting IGMP
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Configuring basic IGMP features
Before you configure basic IGMP features, complete the following tasks:
•
Configure any unicast routing protocol so that all devices can interoperate at the network layer.
•
Configure PIM.
•
Determine the IGMP version.
•
Determine the multicast group and multicast source addresses for static group member
configuration.
•
Determine the ACL to be used by the multicast group policy.
Enabling IGMP
Enable IGMP on the interface where the multicast group memberships are established and
maintained.
To enable IGMP:
Step
Enter system view.
1.
Enable IP multicast routing
2.
and enter MRIB view.
Return to system view.
3.
Enter interface view.
4.
Enable IGMP.
5.
features:
Enabling IGMP
Specifying an IGMP version
Configuring a static group member
Configuring a multicast group policy
performance:
Configuring IGMP query and response parameters
Enabling fast-leave processing
Enabling IGMP NSR
Configuring IGMP SSM mappings
Command
system-view
multicast routing
[ vpn-instance
vpn-instance-name ]
quit
interface interface-type
interface-number
igmp enable
80
Remarks
N/A
By default, IP multicast is
disabled.
N/A
N/A
By default, IGMP is disabled.