Advertisement
If your service provider has enabled the quick arm feature, you can simply touch the Away key:
5.
6.
7.
Forced Arming Feature
Normally all sensors must be secure before you can arm your security system.
For example, a home with a door sensor on the front door. When forced arming is NOT enabled,
you would have to close the door before being allowed to arm the system. When force arming is
enabled, you can arm your system with the door opened, and the door will automatically be
protected after it is fully closed as you leave.
If your service provider has enabled the "forced arming" feature, you will be able to arm your
security system even if pre‐selected sensors are not secure. The Ready Light will flash green to
indicate this feature is available. Press Status key to hear which sensors are not secure.
Check with your installer to confirm how Forced Arming has been set up for your system:
Option 1: At the end of the exit delay, sensors that are not secured will automatically by bypassed.
If they later become secured, the bypass will be removed and they will become part of the active
security system until the system is disarmed.
Option 2: At the end of the exit delay, sensors that are not secured will trigger an entry delay or go
into alarm.
READY
STATUS
AWAY
EXIT DELAY BEEPS
Check ready key is green
Check status key is green
Select the Away Mode
Leave the premises
‐ 9 ‐
Advertisement
