Change the User Type
The user type determines what that user can do:
Master users can arm and disarm partitions. They can create, delete, or modify user codes.
They can also change system settings.
Standard users can arm and disarm partitions. But they cannot create users or review
event history.
Arm only users can only turn on the security system, they cannot disarm, or dismiss any
system conditions.
Example: Change user 6 to a master user to allow them to add/remove users
1.
MENU
YOUR 4 OR 6 DIGIT MASTER CODE
2.
ENTER
3.
2
4.
6
5.
2
6.
MENU
Add Keyfobs
Keyfobs require special programming depending on your requirements. Contact your security
provider to purchase additional keyfobs.
Reset Installer Code
The default installer code is 9713. If you forget this and need to reset it:
1. Unplug the power pack and remove the back up battery
2. Hold down the reset button on the back of the ZeroWire with a small screwdriver
3. Plug in the power pack while keeping the reset button pressed down for 3 seconds
4. Release the reset button
3
ENTER
MENU
MENU
Selects User Configuration menu
Selects configure user type
Select user 6
Sets master user type
Exits from Advanced system configuration
‐ 18 ‐