Bypass a Sensor
The sensor bypass menu is used to bypass (isolate) selected sensors in your security system. A
bypassed sensor is ignored by the system and is not capable of activating an alarm. This option is
commonly used to temporarily ignore sensors that require service, or sensors that you wish to
temporarily add to your "stay mode".
Whilst still offering security with the remaining sensors, bypassing sensors lowers your level of
security.
All bypassed sensors are reset and cleared from memory when your security system is next armed
/ disarmed.
Your security system must be disarmed (turned off) before being able to bypass sensors. After
bypassing your selected sensors, your security system must be armed (turned on) in either the
away or stay mode to secure the remaining sensors.
The status light will turn to yellow to indicate there are one or more bypassed sensors. Touch the
status key to check which sensors are bypassed.
1.
2.
3.
4.
5.
BYPASS
USER PIN CODE
SENSOR NUMBER
0
MENU
Select Bypass Menu
Enter PIN code with authority to
ENTER
bypass
Select a sensor to bypass
ENTER
Toggle between un‐bypassed to
bypassed state
Exits from Bypass Menu
‐ 12 ‐