Front of ZeroWire
Key
Colour
Description
Red
System is in alarm. Enter your PIN
code then ENTER to turn off the
alarm. Press the STATUS key for
ALARM
more info.
Yellow
System is armed in Stay mode.
Not lit
System is disarmed if Away is also
not lit. Press the STAY key to arm in
STAY
Stay mode.
Green
System is normal.
Yellow
Non‐urgent system conditions
present. Press the STATUS key to
hear system conditions.
Red
Urgent system conditions present.
Press the STATUS key to hear system
STATUS
conditions.
If you are unable to fix the issue,
contact your service provider for
help.
Red
System is armed in Away mode.
Not lit
System is disarmed if Stay is also not
lit. Press the AWAY key to arm in
AWAY
Away mode.
Key
Colour
Green
(steady)
Green
(flashing)
READY
Not lit
Press the BYPASS key if you wish to isolate (ignore)
a sensor. Bypassed sensors will not be active when
you arm the system in Stay or Away modes.
BYPASS
Press the CHIME key to select which sensors will
make a doorbell sound on the ZeroWire when they
are tripped.
CHIME
Press the HISTORY key to listen for alarm and
event history.
HISTORY
Feature must be enabled by your security
FIRE
provider. Check what response will be provided.
Hold down the key to send a message to a central
MEDICAL
monitoring centre. Enter your PIN code then
POLICE
ENTER to turn off a SOS alarm.
‐ 6 ‐
Description
All sensors are ready and the system
can be armed in Away or Stay mode.
Some sensors are unsealed but
system is force‐armable. If these
sensors are not sealed by the end of
the exit time the system will go into
alarm.
System cannot be armed, press the
STATUS key for more info