Introduction
UltraConnect is a smartphone app that allows you to:
Check the status of your system
Arm and Disarm partitions
Bypass sensors
Set up users
Operate Z‐Wave devices
Set up system and Z‐Wave features (it depends on Standard or Master)
Web Access Code
This code should be written on the rear of this manual. It permits remote access from the
UltraConnect app. When it is set to 00000000 the app is prevented from connecting.
Example: View Web Access Code or change it to a new one
1.
2.
3.
4.
5.
6.
User Name and PIN
The UltraConnect app requires any username and PIN code to function. This should be written on
the rear of this manual, or refer to Add a Username on page 15.
3. UltraConnect App
MENU
9
YOUR 4 OR 6 DIGIT MASTER CODE
ENTER
9
WEB ACCESS CODE
8 DIGIT CODE
ENTER
MENU
MENU
MENU
Select Sensor Configuration
Select Web Access Code
Web Access Code will be flashed
on the key pad
Enter a new 8 digit Web Access
Code, or skip
Exits from Advanced system
configuration
‐ 20 ‐