Perform a Communicator Test
The communicator is a part of the ZeroWire responsible for sending alarm messages. The
communicator test is only available if your security system has been set up to report to a central
monitoring station. Proper operation of this is very important for alarm reporting.
When testing your communicator, no sirens will sound and a test message will be sent to the
central monitoring station.
Example: Perform a communicator test
Call your central monitoring station and tell
1.
them you are performing a communicator test
2.
MENU
YOUR 4 OR 6 DIGIT MASTER CODE
3.
ENTER
4.
2
The central monitoring station will confirm the
5.
test message was received
6.
MENU
If communicator test fails,
7.
notify your service provider
8
MENU
MENU
Select main menu ‐ Option 4, System Test
Select communicator test
Exits from System Test
‐ 35 ‐