Advertisement
Emergency Keys
ZeroWire has three (3) emergency keys: Medical, Police (duress) and Fire.
If these keys are not lit, then the Emergency Keys are not available on your system. Check with
your service provider to clarify what responses will be provided upon activation.
Touch the required key for two seconds to activate that alarm. You should only touch these keys in
an emergency situation that requires a response by a central monitoring station.
To cancel an emergency activation:
1.
Sensor Reset
Detection devices such as smoke detectors, shock sensors and some glass breaks "latch" their
alarm lights to indicate an alarm condition. The alarm will stay on until it is reset by an authorized
user. Use this menu to acknowledge and clear the alarm.
Example: Reset latching detectors that are in alarm
1.
MENU
YOUR 4 OR 6 DIGIT MASTER CODE
2.
ENTER
3.
MENU
YOUR 4 OR 6 DIGIT MASTER CODE
ENTER
7
Enter you code after an
emergency key has been
activated
Select main menu ‐ Option 7, Sensor Reset
Exits from Sensor Reset Menu
‐ 14 ‐
Advertisement
