Interlogix ZeroWire ZW-6400H User Manual page 30

Set Sensor Chime Mode
You can setup your ZeroWire so that it will make a "chime" sound when programmed sensors are
unsealed. Chime mode does not trigger any alarms and is only used as a low level alert such as a
customer entry door.
1.
2.
3.
Add Sensor to Chime Group
You can add and delete sensors from the "chime group" offering a flexible chime mode feature.
The sensors you have selected to be in the "chime group" stay in memory and are not cleared
when the security system is armed and disarmed.
1.
2.
3.
4.
CHIME
0
MENU
CHIME
SENSOR NUMBER
0
MENU
Select Chime Menu
Toggle Chime Mode on or off
Exits from Chime Menu
Select Chime Menu
Select a sensor number
ENTER
Add or remove the sensor to the
Chime Group
Exits from Chime Menu
‐ 30 ‐