Disarming
Make your way to the ZeroWire through one of the designated entry / exit doors.
Once a sensor detects your presence, the entry delay will begin counting down and your ZeroWire
will repeat a warning message until a valid PIN code is entered. If a valid PIN code is not entered
by the end of the entry delay time, your sirens and communicator will activate.
If you require more time to disarm your system, the entry time can be modified in Menu 8 by a
master user. Away and Stay modes can be configured with different entry delay times, ask your
service provider for further details
Depending on how your system has been set up, entry through a non‐designated door may cause
the alarm to sound immediately for greater security.
1.
2.
3.
4.
Enter the premises
through a designated entry/exit door
ENTRY DELAY BEEPS
USER PIN CODE
Approach the ZeroWire, if you
are detected by a sensor, the
entry warning timer will begin
and the ZeroWire will beep
Enter your PIN code before the
entry delay expires
ENTER
All sensors are now disarmed,
any bypassed sensors are
restored to normal operation
‐ 11 ‐