Troubleshooting - Sega Let’s Go ISLAND! Owner's Manual

84

TROUBLESHOOTING

TROUBLESHOOTING
17
● This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock. If there are no site maintenance personnel or
other skilled professionals available, turn the power off immediately and contact
the office given in this manual or from the point of purchase.
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit. When working with the
product, be sure to turn the power off. Working with the power on may cause an
electric shock or short circuit.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
● After the cause of circuit protector activation has been removed, have the circuit
protector re-engaged. If the unit is used continuously as is, there could be heat
generation or fire, depending on the cause of the activation.
● When the power has been engaged or the TEST MODE has been terminated,
initialization takes place automatically. If anyone is near the product, they could
come in contact or collide with it. Check carefully to be sure that no one is
near the product and that no tools or items have been left on the product, then
engage the power or terminate TEST MODE.
● If problems other than those covered in this manual arise, or if no improvements
can be noted after measures given in this manual have been taken, do not
take measures indiscriminately. Cut off the power immediately and contact the
office shown in this manual or the dealer from whom the product was originally
purchased. Indiscriminate countermeasures could lead to unforeseeable
accidents. They could also result in permanent damages. Also, if the power
is left on while there is an abnormality, a fire, electric shock or other serious
accident can occur.
17
● If an error message is displayed, identify the cause right away and take the
appropriate countermeasures. Leaving the error unaddressed could result in a
breakdown.
● If a problem occurs, first inspect the connection of any wiring connectors.
● Static electricity from your body may damage some electronics devices on the IC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.