Page 1
PRINTING APRIL 2019 Sega Amusements International Limited. 42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom. Telephone: +44 (0) 208 391 8090 Facsimile: +44 (0) 208 391 8099 mailbox@sega.co.uk segaarcade.com Sega Games Co,. Ltd. 1-2-12, Haneda, Ota-ku, Tokyo, 144-8531. Japan.
Page 2
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TO MAINTAIN SAFETY: To ensure the safe operation of this product, be sure to read the following before usage: The following instructions are intended for the users, operators and the personnel in charge of the operation of the product.
Page 3
SEGA shall not be held responsible for any accidents or compensation for damage to a third party resulting from the specifications not designated by SEGA ENSURE THAT THE PRODUCT MEETS THE REQUIREMENTS OF APPROPRIATE ELECTRICAL •...
Page 4
Indicates a warning or caution that, if ignored, may result in the mishandling of the product and cause faulty operation or damage to the product. Sega Amusements Europe Limited. 42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Page 5
Definition of 'Site Maintenence Personnel’ or Other Qualified Individuals Procedures not described in this manual or marked as ‘to be carried out by site maintenance personnel or other qualified professionals’ should not be carried out by personnel without the necessary skill or technological experience. Work carried out by unqualified persons may cause serious accidents, including electrocution.
Page 6
The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical and electronic equipment.
TABLE OF CONTENTS INTRODUCTION HANDLING PRECAUTIONS PRECAUTIONS REGARDING INSTALLATION PRECAUTIONS REGARDING OPERATION PARTS DESCRIPTION ACCESSORIES ASSEMBLY AND INSTALLATION PRECAUTIONS WHEN MOVING GAME DESCRIPTION TEST AND SERVICE DATA MONITOR CONTROLLER UNIT COIN HANDLING LAMPS AND LIGTHING PERIODIC INSPECTION TROUBLESHOOTING GAME BOARD DESIGN RELATED PARTS PARTS LIST COLOUR CODE...
• SEGA shall not be held responsible for damage or compensation for damage to a third party caused by specification changes not designated by SEGA •...
Page 9
• Some parts are not designed or manufactured specifically for this game machine. The manufacturers may discontinue or change the specifications of such general-purpose parts. If this is the case, SEGA cannot repair or replace a failed game machine whether or not a warranty period has...
Page 10
CONCERNING THE STICKER DISPLAY This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical Specifications. It also has a Sticker describing where to contact for repair and for purchasing parts. When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
PRECAUTIONS REGARDING INSTALLATION • This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause fire, electric shock, injury and/or malfunction: • Places subject to rain/water leakage or places subject to high humidity, in the proximity of an indoor swimming pool and/or shower, etc •...
Page 13
Securing a safe area for operation as described in this manual will ensure safe operation for players and observers SEGA shall not be held responsible for damage or compensation for damage to a third party, resulting from the failure to observe this instruction OPERATION AREA (SINGLE CABINET) •...
Page 14
• To install this product, the entrance must be at least 1.2m (47.2 in) in width and 2.6m (102.3 in) in height (with Assy Billboard). If the entrance is too narrow, do not tilt the product carelessly. If all the product weight is put on the casters at one side only, there could be damage or deformation, causing serious accidents such as workers getting caught underneath 1.88m (74 in)
PRECAUTIONS REGARDING OPERATION To avoid injury and trouble, be sure to pay attention to the behaviour of visitors and players. 3-1 BEFORE OPERATION • In order to avoid accidents, check the following before starting the operation: • To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read.
Page 16
• To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause contact, collisions, and/or trouble between customers • During daily cleaning, be sure to check the surface of the control unit and other parts that the player touches with his/her hands for damage, cracks, or loose screws.
Page 17
3-2 PAYING ATTENTION TO CUSTOMERS To avoid injury and trouble, be sure to constantly give careful attention to the behaviour and man- ner of the visitors and players. DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) • For safety reasons, do not allow any of the following people to play the game: Those who have high blood pressure or a heart problem Those who have experienced muscle convulsion or loss of consciousness when playing video games, etc...
Page 18
● Players directly hold the control unit with their bare hands, so it is recommended that wet towels (paper towels) be provided. ● Diligently clean the parts that players touch directly to ensure a pleasant game playing experience. ● Inspect the coin insertion slots to make sure no foreign objects have been in- serted and that they have not otherwise been tampered with as this will prevent play.
ACCESSORIES Confirm that the accessories listed in the table below are present when setting up the product. Accessories marked “Spare” are consumable items but included as spares. PART NAME / NUMBER DIAGRAM QUANTITY Owner’s Manual (Part #: 420-0034-00UK) Master Key Security Key Power Lead UK (Pt No LM1227)
Page 21
PACKING LIST PART NAME / NUMBER Material/Spec QUANTITY SPCC-1.2T Rubber Strip SPCC-1.2T Logo Board Fixed Iron HexagonTriple Combination M6*35 Screw Hexagon Triple Combination M8*35 Screw M4*12 Hexagon Socket Head Screw AMP 10M Cable 10m...
ASSEMBLY AND INSTALLATION ● Perform assembly work by following the procedure herein stated. Failure to comply with the instructions can cause electric shock ● Perform assembling as per this manual. Since this is a complex machine, incorrect assembling can cause an electric shock, machine damage and/or improper functioning as per specified performance ●...
Page 23
● Handle molded parts with care. Excessive weight or pressure may cause them to break and the broken pieces may cause injury ● To perform the operation safely and accurately you must use a safe, steady footstool or stepladder. Working without this may lead to a fall and possible injury ●...
Page 24
6-1 JOINING THE CABINETS ● The Monitor Cab is very heavy. Lifting and placement of the Monitor Cab onto the Base Cab should never be carried out by less than 4 people. Attempting to lift and place the Monitor Cab using less than 4 people could cause serious injury to both those involved with and around the installation and cause irrepa- rable damage to the Cabinet Remove the screw and open the front cover of the base...
Page 25
Connect the cables between the Seat Cabinet and Monitor Cabinet and connect the two Cabinets together with the fixings provided. Establish connections in Seat Cab base. Establish All Connections Apply the fixing plate of the logo board to the light box with the fixings provided. Fix the logo board to the light box assembly...
Page 26
Fix the light box assembly to the top of the Monitor Cabinet. Connect the light box cable to LED cables on both sides of the Cabinet.Use the rubber strip to connect the board, cover the LED cable and attach the light box and Monitor Cabinet Establish All Connections...
Page 27
Reapply the Seat Cabinet front cover and Monitor Cabinet rear door...
Page 28
6-2 FIXATION TO INSTALLATION SITE Make sure that all the adjusters contact the floor. Otherwise the cabinet could move, causing an accident. The product comes with casters attached at 8 locations and adjusters at 8 locations. When the installation site has been determined, have the adjusters come in direct contact with the floor. Establish a gap of about 5 mm between the floor and the casters and adjust the unit so that it will remain level.
Page 29
Move the product to the installation site. If the product is to be installed near a wall, secure enough passage- way space for players to access the seat. You must also secure a 20 cm space between the back wall and the back of the cabinet for ventilation.
PRECAUTIONS WHEN MOVING 7-1 MOVING THE MACHINE ● Always disconnect the power cable before moving the product. If it is moved with the power cable connected, the cable could be damaged, causing fire or electric shock ● To move the unit over the floor, pull in the adjustors and have the casters contact the floor.
Page 31
● When moving the cabinet, do not hold, push, or pull the Control Unit(s). This may disfigure or damage them ● If you need to move components through a narrow or low door and the only way to get the separated components through is to turn them on their side, or if a separation method other than those described in this manual is required, either make a request to the office listed in this document or the place of pur- chase to perform the operation or contact them regarding how to perform it.
GAME DESCRIPTION 1-1 GAME ATTRACT After the coins are inserted, available Credits will display at the bottom of the screen. After required coins are inserted, the text will change from “PLEASE INSERT COINS” into “PRESS START BUTTON”. The start button on the Cabinet will then be flashing. Coin system can accumulate up to 24 Credits.
Page 33
The Player can choose from the following Game Modes: - Quick Race - Players can race alone without other human racers - Championship - Players race 3 predetermined tracks in a row and must finish within the top 3 positions in order to progress to the next race - Multiplayer - Players can race against other human racers 1-3 TRACK SELECT After selecting Quick Race or after all human racers have entered a Multiplayer lobby, the Player will...
Page 34
1-4 RIDER SELECT After selecting a Track to play, the Player must choose their Rider. The Player can choose from: Bones Falcon Sarge Charlie Tyra If the Player does not select a Rider before the timer reaches zero, the Rider they are currently selecting will be chosen.
Page 35
1-5 UPGRADE SCREEN After selecting a Rider, the Player can choose upgrades to apply. These will improve aspects of the Bike like Speed, Acceleration etc. Upgrades are applied at the end of every race. A Player can only retain their upgrades by continuing to race. The Player must use the handlebars to move up and down and the accelerator or boost to make a selection.
Page 36
The Player will be given a quick overview of the controls in the loading screen.
Page 37
1-6 IN-RACE SCREEN The in-race screen and Player HUD are detailed below:...
Page 38
After finishing a race, the Player will be shown first, second, third, and forth place. The Player will then be able to enter a three letter name at the Name Entry screen. They will also be shown the Race Ranking.
Page 39
1-6 CONTINUE SCREEN After a race is over, the Player can choose to race again by inserting another Credit. If the Player chooses to race again, they will gain access to more upgrades. If they Player does not enter a Credit before the timer reaches zero, the game will end.
Page 40
Safety Warnings Safety warnings will be appear in the following conditions during the game: (1) Stop Motion Warning - when the Motion Stop button is pressed, the Motion will be stopped. (2) Safety Sensor Warning - when the Safety Sensor is activated, the Motion will be stopped. (1) Stop Motion Warning Once the Motion Stop button is pressed, motion of the cabinet will be stopped at once and the Stop Motion Warning will be activated.
Page 41
Safety Sensor Warning If any object blocks the safety sensor or enters the caution area, motion of cabinet will be stopped at once and the Safety Sensor Warning will be activated. When the caution area is cleared, motion of cabinet will restart in a countdown of 3 seconds.
EXPLANATION OF TEST AND DATA DISPLAY Do not touch any parts that are not specified in these directions. Touching un- specified locations may lead to electric shock or cause short circuits. ● Be careful that your finger or hand does not get caught when opening/closing the coin chute door.
Page 43
Perform tests and data checks periodically by manipulating the TEST Button and SERVICE Button in the cabinet. Follow the instructions in this chapter to conduct checks when the game machine is first installed, when money is being collected, or when the game machine does not operate prop- erly.
Page 44
9-1 GAME TEST MODE This is the main Test Mode menu. Here you can access a number of different sub menus to test different aspects of the Cabinet to ensure they are all working correctly. Test Mode menu Use Service to cycle through items. Use Test to select an item and view that item's sub-menu. Select EXIT to return to Game.
Page 45
9-2 GAME SETTINGS This is the main Test Mode menu. Here you can access a number of different sub menus to test different aspects of the Cabinet to ensure they are all working correctly. Use Service to cycle through items. Use Test to select an item and view that item's sub-menu. Select EXIT to return to Game Test Menu Game Time Adjust the time a Player has in a race...
Page 46
9-3 BOOKKEEPING These menus display statistics for credits, gameplay, and the Cabinet overall. Bookkeeping Menu (1/6) - Play Info Use the Test button to proceed to Bookkeeping Menu #2 Total Time On The total time the Cabinet has been powered on Total Credit In Total Credits that have been inserted Total Credit Continues...
Page 47
Bookkeeping Menu (2/6) - Daily Income Use the Test button to proceed to Bookkeeping Menu #3 Monday Income taken on this day Tuesday Income taken on this day Wednesday Income taken on this day Thursday Income taken on this day Friday Income taken on this day Saturday...
Page 48
Bookkeeping Menu (3/6) - Hourly Income Use the Test button to return to the Bookkeeping Menu #4. This menu shows a histogram breaking down how many Credits were inserted within each hour.
Page 49
Bookkeeping Menu (4/6) - Chosen Vehicle Use the Test button to proceed to Bookkeeping Menu #5 Bones The amount of times this rider has been selected Falcon The amount of times this rider has been selected Sarge The amount of times this rider has been selected Charlie The amount of times this rider has been selected Tyra...
Page 50
Bookkeeping Menu (5/6) - Chosen Track Use the Test button to proceed to Bookkeeping Menu #6 Cribb's Canyon The amount of times this track has been selected Hangar 9 The amount of times this track has been selected Docks The amount of times this track has been selected Iceland The amount of times this track has been selected London...
Page 51
Bookkeeping Menu (6/6) - Reset Record Use the Test button to return to the Main Test Menu. This menu allows you to clear and reset all Bookkeeping data. This action requires confirmation.
Page 52
9-4 CREDIT SETTINGS Use this menu to adjust the Credit to Coin ratio. Credit Count Total Standard Credit count Service Credits Total Service Credit count Entry Type Adjust Credit type Credit Settings Adjust Credit/Coin ratio Reset Credit Settings Reset Credit Settings to Factory Default...
Page 53
9-5 INPUT DEVICES Use this menu to check the operation of the Input devices. Input Test Menu To exit this menu, press the Test and Service buttons together at the same time. Steering Check Steering function/range Up Button Check Up Button function Down Button Check Down Button function Throttle Left...
Page 54
Left Sensor Check Left Sensor function Right Sensor Check Right Sensor function Reset Input Settings Reset all Input Settings to Factory Defaults Back Return to Main Test Menu 9-6 OUTPUT TEST Use this menu to check the operation of the Output devices. Output Test Menu Use Service to cycle through items and Test to turn a device ON or OFF.
Page 55
9-7 CLOCK SETTINGS Use this menu to adjust the Cabinet clock. Year Adjust this time varaible Month Adjust this time varaible Adjust this time varaible Hour Adjust this time varaible Minute Adjust this time varaible Second Adjust this time varaible Confirm clock changes Back Return to Main Test Menu...
Page 56
9-8 NETWORK SETTINGS Use this menu to adjust network configurations. Network Status Current network status of Cabinet Cabinet ID Cabinet ID number IP Range Range of the assigned IP Confirm IP Range Confirm any IP Range changes Reset Network Settings Reset all Network Settings to Factory Default Back Return to Main Test Menu...
Page 57
9-9 LANGUAGE SETTINGS Use this menu to adjust the game language. Use "Reset All Settings" to return all Settings to Factory Defaults. This will also reset Bookkeeping.
VIDEO DISPLAY The LCD display screen is adjusted prior to leaving the factory. Avoid any unnecessary adjustment ● If the adjustment method in this manual does not resolve the problem, contact the customer service number in this manual or your supplier ●...
Page 59
10-2 CLEANING THE SCREEN ● Since the LCD display screen is susceptible to damage, pay careful attention to its handling. When cleaning, refrain from using water or volatile chemicals ● Do not climb onto the control panel. This could lead to injuries, such as bumping your head ●...
CONTROLLER UNIT ● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit. ● Be careful not to damage the wires. Damaged wires may cause an electric shock, short circuit or present a risk of fire.
Page 61
11-1 REPLACING THE HANDLES Turn Power OFF Remove the Button Panel fastening fixing and remove the Button Panel Unplug the Handle Cables...
Page 62
Replace with new Handles. Repeat steps in reverse order 11-2 REPLACING THE BRAKE Turn Power OFF Remove the Button Panel fastening fixing and remove the Button Panel Unplug the Brake Cables...
Page 63
Remove the Upper Brake fastening fixing Remove the Brake spacing metal fixing and take the spacing sheet metal Remove the fastening fixing and of the Brake and remove...
Page 64
Replace with new Brake. Repeat steps in reverse order 11-3 REPLACING THE BOOST BUTTON Turn Power OFF Remove the button panel fastening screw and remove the button panel Unplug the cables of brake button and accelerator button Pull out the button cover Remove the upper brake fastening screw Remove the brake spacing metal fastening screw and take out the spacing sheet metal Loosen the fastening screw of the brake and pull out the brake...
Page 65
Loosen the fastening screw of the BOOST button and remove the button Replace with new BOOST button, repeat above steps in reverse order...
COIN HANDLING HANDLING THE COIN JAM If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
Page 67
CLEANING THE COIN SELECTOR (MECHANICAL) Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Remove the CRADLE. When removing the retaining ring (E ring) be very careful so as not to bend the rotary shaft.
Page 68
CLEANING THE COIN SELECTOR (SR3 / NRI) Remove and clean smears by using a damp soft cloth dipped in water. DO NOT use any diluted chemical detergent or cleansing agent as this will impair the workings of the component. GATE Open the reject gate to gain access to the rundown path.
Page 69
12-2 FAULT FINDING The following information is presented for customers’ guidance in rectifying a fault but does not cover all possible causes. All acceptors with electronic faults should be returned to an approved service centre for repair. SYMPTOM INVESTIGATE POSSIBLE CAUSE Poor Contact Connector Loose Wire...
Page 70
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) ● The price of play is determined by the configuration of switches located on either the EXCEL or VTS board. The type of board used is determined by product location. Switch settings for both types of board remain the same. This product comes equipped with a Crane NRI Coin Acceptor.
Page 71
12-4 ADJUSTING THE PRICE OF PLAY (VTS) This product comes equipped with a Crane NRI Coin Acceptor. To adjust the price of play ALL CREDIT SETTINGS are adjusted via the VTS CREDIT BOARD. IMPORTANT! The CREDIT SETTINGS within the SYSTEM TEST MODE must be set to 1 coin 1 credit to allow the CREDIT BOARD to function correctly.
LAMPS AND LIGHTING • When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit • You may get burned by a hot fluorescent lamp or other lamps. Pay full attention to the lamps when performing the work •...
Page 73
13-2 START BUTTON LAMP Turn off the power. Unlock and open the Cabinet coin door. FIG. 13-2a Remove Lamp and Switch housing from the Button by pulling the housing away from the button. These can sometimes be a little tight upon on initial removal. Lamp Housing FIG.
Page 74
Replace the bulb for that of the same type. Place the bulb and switch housing back into the button assembly and resecure coin door BULB WEDGE TYPE 12v 1.2W FIG. 13-2d...
PERIODIC INSPECTION The items listed below require periodic check and maintenance to retain the performance of this machine and to ensure safe business operation. When handling the controller, the player will be in direct contact with it. In order to always allow the player to enjoy the game, be sure to clean it regularly.
Page 77
Cleaning the Cabinet Surfaces When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do not use solvents such as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching agent and chemical dustcloth.
TROUBLESHOOTING 15-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) • This work should be performed by site maintenance personnel or other skilled professionals. Work performed by non-technical personnel can cause a severe accident such as an electric shock. If there are no site maintenance personnel or other skilled professionals available, turn off the power immediately and contact the office given in this manual or from point of purchase.
Page 79
If a problem occurs, first check to make sure that the wiring connectors are properly connected. 15 TABLE 01 PROBLEM CAUSE COUNTERMEASURES Firmly insert the plug into the The power is not ON outlet Make sure that the power supply/ Incorrect power source/voltage voltage are correct When the Main...
GAME BOARD ● When working with the product, be sure to turn the power off. Working with the power on may cause an electric shock or short circuit ● Be careful not to damage the wires. Damaged wires may cause electric shock, short circuit or present a fire risk ●...
Page 81
16-1 HOW TO REMOVE GAME BOARD The game board is inside the rear door mounted in the right hand corner. Turn off the power. Remove the door release fixings from the door. Door Release Fixings Unlock with the master key and remove the access door. The Game Bd is located on the right hand side. GAME BD...
Page 82
Disconnect all of the connectors connected to the Game Board (Game Board PC may differ from picture). Carefully disconnect all connection to from the Game Bd Unscrew the (2) M4 Phillips screws which secure the Game Board in place. M4 Fixings Lift and remove the Game board from the cabinet.
WIRE COLOR CODE TABLE The DC power wire color for this product is different from previous SEGA titles. Working from the previous wire colors will create a high risk of fire. The color codes for the wires used in the diagrams in the following chapter are as follows:...