LCD
12- ADJUSTING THE LCD
This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock.
All adjustment values are set accurately at the time of shipping from the factory.
Do not readjust these values needlessly or apply adjustments not specified in this
manual. The display may not appear properly if the values are incorrect.
REMOVING THE LCD MONITOR ADJUSTMENT BOARD
1
Turn off the power switch.
12
2
Remove the 2 truss screws and unlock the lock to take off the back door. Make sure to support the back
door so that it does not fall down.
3
Locate the LCD Control PCB.
TRUSS SCREW (2), chrome
M4 x 25
BACK DOOR
CONTROL PCB