Assembly And Installation - Sega Let’s Go ISLAND! Owner's Manual

ASSEMBLY AND INSTALLATION


● Proceed with checks and tasks as indicated in these instructions. If instructions
are not followed, or if tasks and/or checks are neglected, an electric shock or
other very serious accident, even fatal accident, can occur. Also, customers
could be injured while operating the product.
● This work should be carried out by the site maintenance personnel or other
qualified professionals. Work performed by non-technical personnel can cause
a severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation. If no one with proper technological expertise is available, request
service from the office indicated in this document or the point of purchase so as
to ensure safety.
● When assembling, be sure not to attempt alone. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
● Adhere strictly to all of the work procedures stipulated in this document. If
two or more workers are working at the same time, exercise special caution. If
sequences are carried out erroneously, accidents can result. There might also
be cases in which the assembly cannot be completed.
● Make sure that all the adjusters are resting on the floor. The cabinet may move
and cause an accident if the adjusters are not laid out properly.
● To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
● Ensure that plenty of space is available for assembly and installation. Performing
these tasks in an unsuitable environment may cause accidents.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause
an electric shock.
● When connecting wires inside the cabinet, there may be instances in which the
indoor lighting does not reach that location. Have a flashlight or other auxiliary
lighting equipment on hand. If wires are connected carelessly, there could be an
accidental short circuit, fire, etc.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
● Ensure that connectors are accurately connected. Incomplete connections can
cause electric shock.
● Exercise proper caution when using a step or stool to perform work. Falling or
tipping over could result in a major accident. Also, if the ceiling is low, you could
bump your head.
ASSEMBLY AND INSTALLATION
1
6