Periodic Inspection Table; Cleaning The Cabinet Surfaces - Sega Let’s Go ISLAND! Owner's Manual

■PERIODIC INSPECTION TABLE
PERIOD
As appropriate CABINET SURFACES
FLUORESCENT LAMP
Daily CABINET
SAFETY DEVICES
Weekly LCD
Monthly START BUTTON,
CONTROLLER
COIN SELECTOR
RINGWIDE
Every 3 months CONTROLLER
COIN SELECTOR
1 year RINGWIDE
POWER PLUG
FRONT CABINET INTERIOR

CLEANING THE CABINET SURFACES

When the cabinet surfaces become dirty, remove stains with a soft cloth soaked in water or diluted (with water)
chemical detergent and then wrung dry. To avoid damaging the finish, do not use such solvents as thinner, benzene,
etc. (other than ethyl alcohol) or abrasives (bleaching agent and chemical dust-cloth).
Some general-purpose household, kitchen, and furniture cleaning products may contain strong solvents that degrade
plastic parts, coatings, and print. Before using any cleaning product, read the product's cautionary notes carefully
and test the product first on a small area that is not highly visible.
ITEMS
Cleaning
Inspection
Confirm that adjusters contact floor
Screen cleaning
Check monitor adjustments
Check switches and lamps
Inspect volume
Coin switch inspection
Coin insertion test
Settings check
Inspect gear meshing
Apply grease
Cleaning
Cleaning
Inspection, Cleaning
Cleaning
PERIODIC INSPECTION
DESCRIPTION
83
REFERENCE
As below
As above
Chapter 3
12-2
12-3
Chapter 11
Chapter 13
Chapter 15
15-1
Chapter 10, S/M
13-1-1,13-2-1
13-1-3,13-2-3
15-2
19-2
As above
As below
16