Connection Of Power And Ground - Sega Let’s Go ISLAND! Owner's Manual

22
ASSEMBLY AND INSTALLATION

- CONNECTION OF POWER AND GROUND

● Use the power supply equipped with an earth leakage breaker. Use of power
supply without such a breaker could result in fire if there is a current leakage.
● Have available a securely grounded indoor earth terminal. Without proper
grounding, customers could be electrocuted and product operations might not
always be stable.
● Do not expose power cables or earth (ground) wires on the surface, (floor,
6
passage, etc.). If exposed, the power cables and earth (ground) wires are
susceptible to damage. Damaged cords and wires can cause an electric shock or
short circuit. Wherever wiring has been laid out on a floor surface, use a wiring
protection cover.
● For safety reasons, be sure to first connect the power cable to the product. If the
power cable is first connected to the power plug, an accident such as an electric
shock or short circuit may occur.
● After laying out the power cable on the floor, be sure to always protect it. If the
power cable is left exposed, it can easily be damaged, resulting in electrical shock.
If grounding has been established with the ground wire inside the power cable, do not
perform grounding with the AC unit ground terminal. Conversely, if the AC unit ground
terminal has been used for grounding, do not establish ground with the ground wire in
the power cable. Otherwise there could be faulty or erroneous operations.
The AC unit has Power Switch, Circuit Protector, Earth Terminal and the inlet which connects the power cable.
1
Confirm that the main switch is at OFF.
NOT USED
(Lan Cable Access)
AC unit
FUSE
POWER SWITCH
Main switch on.
INLET
USE ONLY 250V FUSES