Coin Selector - Sega Let’s Go ISLAND! Owner's Manual

COIN SELECTOR

1
● This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock.
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
When attaching or removing doors be careful that your hand or finger does not
get caught in anything.
● Remove and clean smears by using a soft cloth dipped in water or diluted
chemical detergent and then squeezed dry.
● After cleaning the Coin Selector, insert a regular coin in the normal working status
and ensure that the selector correctly functions.
● The Coin Selector is a precision device. Careless handing could result in damaged
parts, poor connection of electronic circuits, etc.
● Never apply machine oil, etc. to the Coin Selector.
● Do not open the lid more than 90 degrees. Doing so will place undue force on the
hinge which could break it.
● Do not disassemble or take out undesignated parts.
69
COIN SELECTOR
14