Fluorescent Lamp And Lamp Replacement - Sega Let’s Go ISLAND! Owner's Manual

FLUORESCENT LAMP AND LAMP REPLACEMENT

1
● This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock.
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
● When assembling, be sure to use plural persons. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
● Use lamps of the specified ratings. Using lamps with different ratings may cause
fires or damage.
● There is the danger of short circuits or smoke generation due to deterioration of
insulation in lighting fixtures resulting from age deterioration.
Check for anomalies such as the following:
Does it smell like something is burning?
Is there socket discoloration?
Are any lamps being replaced frequently?
Do lamps not go on properly?
● You may get burned by a hot fluorescent lamp or other lamps. Pay full attention
to the lamps when performing the work.
● When replacing a fluorescent lamp or other lamps, be careful not to place too
much stress on the glass part. Doing so could cause it to break, and broken
pieces may cause personal injury.
● Hold the parts firmly while removing the affixing screws. When all the affixing
screws are removed, the part could fall off, resulting in an accident.
● To perform the operation safely and accurately you must use steady stepstool.
Working without this may lead to a fall and possible injury.
● Be careful when handling the plastic parts. Do not apply excessive force or
shock to these parts. Failure to observe this instruction may result in breakage,
and broken pieces and cracks or chips in these parts may cause personal injury.
FLUORESCENT LAMP AND LAMP REPLACEMENT
79
15