68
CONTROLLER
1-2- SIDE VOLUME GREASING
● B e sure to use the designated grease. Using undesignated grease can cause parts
damage.
● D o not apply grease to locations other than as specified. Doing so may create a
risk of operational problems and deterioration of parts.
● T he designated periods for greasing serve only as a guide. Whenever there are
squeaks or other anomalies, apply grease at designated locations
Grease the parts listed below once every 3 months.
Use GREASE MATE (PART No. 090-0066) as spray grease.
1
Refer to Steps 1 and 2 of 13-1-1 "TOP VOLUME ADJUSTMENT" and take off the controller cover.
2
Grease the gear interface as shown in the figure.
13
APPLY GREASE.