Top Volume Adjustment - Sega Let’s Go ISLAND! Owner's Manual

1-1-2 TOP VOLUME REPLACEMENT
1
Turn off the power switch.
2
Refer to Step 2 of 13-1-1 "TOP VOLUME ADJUSTMENT" and take off the controller cover.
3
Undo the cord clamp and disconnect the connector. Be careful not to damage the wires when doing so.
4
Remove the 2 screws and take off the top
volume.
SCREW (2)
M4 x 8, w/flat & spring washers
5
Remove the 2 setscrews and pull the gear off the volume shaft.
VOLUME
6
Remove the nut holding the top volume bracket in place and take the volume off the top volume bracket.
CORD CLAMP
CONNECTOR
SM4P
TOP VOLUME
GEAR
TOP VOLUME BRACKET
CONTROLLER
SET SCREW (2)
M3 x 6
1
13