Rollover Protection System (Rops Safety - Toro Workman 07390 Operator's Manual

•
To reduce the potential fire hazard, keep the
engine area free of excessive grease, grass,
leaves, and accumulation of dirt.
•
If you must run the engine to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the
engine and any moving parts. Keep bystanders
away from the machine.
•
Do not overspeed the engine by changing the
governor settings. The maximum engine speed
is 3,650 rpm. To ensure safety and accuracy,
have an Authorized Toro Distributor to check the
maximum engine speed with a tachometer.
•
If major repairs are ever necessary or assistance
is required, contact an Authorized Toro Distributor.
•
To ensure optimum performance and safety,
always purchase genuine Toro replacement
parts and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous. Altering this machine in any
manner may affect the operation of the machine,
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Do not repair or revise—read the Operator's Manual.
1. Warning—read the Operator's Manual.
93-9850
performance, durability, or its use may result in
injury or death. Such use could void the product
warranty of The Toro® Company.
Rollover Protection System
(ROPS) Safety
•
Do not remove the ROPS from the machine.
•
Ensure that the seat belt is attached and that you
can release it quickly in an emergency.
•
Check carefully for overhead obstructions and do
not contact them.
•
Keep the ROPS in safe operating condition by
thoroughly inspecting it periodically for damage
and keeping all the mounting fasteners tight.
•
Replace a damaged ROPS. Do not repair or alter
it.
•
The ROPS is an integral safety device.
•
Always wear your seat belt.
decal93-9850
93-9852
2. Crushing hazard—install the cylinder lock.
8
decal93-9852