Operation - Toro Workman 07390 Operator's Manual

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.
CAUTION
A raised bed full of material without the proper
safety support may lower unexpectedly.
Working under an unsupported raised bed
may cause injury to you or others.
• Before servicing or making adjustments to
the machine, shut off the engine, engage
the parking brake, and remove the key
from the key switch.
• Remove any load material from the bed
or other attachment and insert the safety
support on a fully extended cylinder rod
before working under a raised bed.
Operating the Cargo Box
Note:
If possible, center loads in the cargo box.
Note:
Remove all cargo from the box before lifting
the box up to service the machine.
Raising the Cargo Box
WARNING
Driving the machine with the cargo box raised
may cause the machine to tip or roll easier.
The box structure may become damaged if
you operate the machine with the box raised.
• Operate the machine only when the cargo
box is down.
• After emptying the cargo box, lower it.
Move the lever rearward to raise the cargo box
18).
1. Cargo-box lever
Lowering the Cargo Box
WARNING
The weight of the box may be heavy. Hands
or other body parts could be crushed.
Keep your hands and other body parts away
when lowering the box.
Move the lever forward to lower the cargo box
18).
Opening the Tailgate
1. Ensure that the cargo box is lowered completely.
2. Open the latches on the left and right side of the
cargo box and lower the tailgate
(Figure
24
Figure 18
(Figure
g024612
(Figure
19).