Cisco SCE 2000 Installation And Configuration Manual page 85

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Specify the status of the SCE 2000 after abnormal boot.
Step 7
To specify Operational status after abnormal boot, press Enter.
•
To specify Not-Operational status after abnormal boot, type 2 and press Enter.
•
Enter admin status of the SCE after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]:
The following examples present the procedure for configuring the topology-related parameters for
various topologies.
EXAMPLE 1
Following is a sample topology configuration for a non-redundant topology using an optical splitter, that
is, a single SCE 2000 connected in receive-only connection mode, to one or two GBE links
Would you like to enter the Topology configuration menu? [no]: y
Would you like to enter the Topology configuration menu? [no]: y
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]: 2
Is this a cascade deployment? [no]: no
Enter admin status of the SCE after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]: 1
Data collection for the system configuration is completed.
All other parameter values are automatically assigned by the system.
EXAMPLE 2
Following is a sample topology configuration for a non-redundant inline topology. In this topology, a
single SCE 2000 is connected to one or two GBE links.
When the inline connection mode is specified, the user must specify the on-failure link behavior.
Would you like to enter the Topology configuration menu? [no]: y
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]: 1
Is this a cascade deployment? [no]: no
Enter On-failure behavior:
1- bypass
2- cutoff
Enter your choice [1]: 1
Enter admin status of the SCE after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]: 1
Data collection for the system configuration is completed.
All other parameter values are automatically assigned by the system.
OL-7824-07
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Initial System Configuration
5-21