Related Publications - Cisco SCE 2000 Installation And Configuration Manual

About this Guide
Table 2
Chapter
6
7
8
A
B

Related Publications

Your SCE 2000 platform and the software running on it contain extensive features and functionality,
which are documented in the following resources:
•
•
•
•
•
OL-7824-07
Document Organization (continued)
Title
Cabling the Line Ports and Completing the
Installation, page 6-1
Basic SCE 2000 Platform Operations,
page 7-1
Troubleshooting, page 8-1
The External Optical Bypass Module,
page A-1
CLI Commands to Verify a Successful
Installation, page B-1
Cisco CLI software:
Cisco SCE2000 and SCE1000 Software Configuration Guide
–
Cisco SCE2000 and SCE1000 CLI Command Reference
–
For initial installation and startup information, refer to the
For international agency compliance, safety, and statutory information for wide-area network
(WAN) interfaces for the SCE 2000 platform, refer to the
Information for Cisco Service Control Engine
For installation and configuration of the other components of the Service Control Management Suite
refer to:
Cisco Service Control Product Installation Guide
–
Cisco SCMS Subscriber Management User Guide
–
Cisco SCMS Collection Manager User Guide
–
Cisco Service Control Application for Broadband User Guide
–
Cisco Service Control Application Reporter User Guide
–
To view Cisco documentation or obtain general information about the documentation, refer to the
following sources:
Obtaining Documentation, Obtaining Support, and Security Guidelines, page xiii
–
The Cisco Information Packet that shipped with your SCE 2000 platform.
–
Description
This chapter provides instructions for
cabling the Gigabit Ethernet ports for both
one and two SCE 2000 topologies, and for
configuring Gigabit Ethernet (GBE)
interface parameters. In a topology utilizing
two SCE 2000s (cascade), this includes the
cascade ports as well as the line ports.
This chapter describes how to start up the
SCE 2000 platform, reboot, and shutdown. It
also describes how to manage configurations.
This chapter provides basic system startup
troubleshooting information.
This appendix explains how to install the
optional external optical bypass module.
This appendix provides a basic
post-installation checklist to verify that the
installation was successful.
SCE 2000 4xGBE Quick Start
Regulatory Compliance and Safety
(SCE).
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Guide.
xi