Table of Contents
Advertisement
Managing SCE 2000 Configurations
How to View the User Log Counters
View the user log for errors that occurred during the installation process.
Step 1
At the SCE 2000# prompt, type show logger device User-File-Log counters and press Enter.
Examples for Viewing the User Log Counters
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log
command to display details about the errors.
Managing SCE 2000 Configurations
The procedures for managing SCE 2000 platform configurations are explained in the following sections:
•
•
•
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE platform operation and
configuration. This configuration, referred to as the running-config , is saved in the SCE platform
volatile memory and is effective while the SCE platform is up. After reboot, the SCE platform loads the
startup-config, which includes the non-default configuration as saved by the user, into the
running-config.
The SCE platform provides commands for:
•
•
After configuring the SCE platform, you may query for the running configuration using the command
show running-config. This command displays the non-default running configuration. To view all SCE
platform running configuration, whether it is the default or not, you may use the option all-data in the
show running-config command.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
7-4
Viewing Configuration, page 7-4
How to Save or Change the Configuration Settings, page 7-5
How to Recover a Previous Configuration, page 7-7
Viewing the running configuration
Viewing the startup configuration
Chapter 7
Basic SCE 2000 Platform Operations
OL-7824-07
Advertisement
Table of Contents
Troubleshooting
