32K/60K Step Standard Type Cpu (Fp2-C2L/Fp2-C2) - Panasonic fp2/fp2sh User Manual

FP2/FP2SH
2.4.1

32k/60k Step Standard Type CPU (FP2-C2L/FP2-C2)

Parts Terminology and Functions
Status indicator LEDs (
1
display the operating condition and error statuses.
Initialize/test switch (
2
Setting the switch to the "INITIAL" side clears errors and initializes the operation
memory. Setting the switch to the "TEST" side puts the PLC in the test operation
mode.
Mode selector (
3
is used to change the operation mode of the PLC.
This is used to switch between the RUN, REMOTE, and PROG. modes.
COM port (RS232C) (
4
is used to connect a computer or general−serial devices .
Tool port (RS232C)
5
is used to connect a programming tool.
Operation condition switches (
6
are used to set the baud rate of the programming tool, to select the program
memory and to select the writing operation for the program memory.
Memory backup battery
7
for backup of the internal memory (RAM).
Part number: AFC8801 (CR2450 or equivalent)
page 2 − 9)
page 2 − 9)
page 2 − 10)
page 2 − 11)
page 2 − 21)
Parts and Functions
2.4 FP2SH CPU
2 − 19