Transferring Data From The Ram To The Ic Memory Card - Panasonic fp2/fp2sh User Manual

FP2/FP2SH
6.8.4

Transferring Data From the RAM to the IC Memory Card

The "RAM → ROM Transfer" function in the FPWIN GR tool software is used to send
programs and data in the CPU to an SRAM type IC memory card. The data range can
be specified as any of the following fields: WL, WR, DT, FL, SV, EV, and LD. (DIP switch
settings: SW2: off, SW4: on)
FP2SH (FP2-C2P, FP2-C3P)
Internal SRAM
Program
Comment
Internal FROM
RAM→ROM
transmission
Program
Autoexec.spg
IC memory card
Note
This method can only be used with an SRAM type IC memory
card.
6.8 FP2SH IC Memory Card Operation (for FP2−C2P/FP2−C3P)
Data
Data
FP2/FP2SH Operation
6 − 33