Specifications - Panasonic fp2/fp2sh User Manual

FP2/FP2SH

10.1 Specifications

General Specifications
Item
Ambient temperature
Storage temperature
Ambient humidity
Storage humidity
Breakdown voltage g
Insulation resistance
Vibration resistance
Shock resistance
Noise immunity
Operating conditions
Dimensions
FP2 backplane
Item
Number of module
L (mm/in.)
FP2 backplane H type
Item
Number of module
L (mm/in.)
The illustration above shows the 7-module type. The 5-module type does not have an
expansion connector.
Note: Dimension of each unit can be checked in PLC site
(http://panasonic−electric−works.net/ac).
Descriptions
0 to +55°C/32 to 131°F
−20 to +70°C/−4 to +158°F
30 to 85% RH (at 25°C non-condensing)
30 to 85% RH (at 25°C non-condensing)
1,500V AC, 1 minute between AC external terminal and frame ground terminal
500V AC, 1 minute between DC external terminal and frame ground terminal
100MΩ or more (measured with a 500V DC megger testing) between external terminal
and frame ground terminal
10 to 55Hz, 1 cycle/min: double amplitude of 0.75mm/0.030 in., 10 min on 3 axes
2
98m/s , 4 times on 3 axes
1,500 Vp-p with pulse widths 50ns and 1μs (based on in-house measurements)
Free from corrosive gases and excessive dust
L
Description
5 modules 7 modules
140/5.512 209/8.228
Description
Basic backplane
11 modules
349/13.740
9 modules 12 modules
265/10.433 349/13.740
Expansion backplane
10 modules
349/13.740
Specifications
10.1 Specifications
DIN rail mounting groove
(DIN EN50022, width: 35/1.378)
(unit: mm/in.)
14 modules
405/15.945
10 − 3