Reading The Program - Panasonic fp2/fp2sh User Manual

IC Memory Card
7.3 For Use as Program Memory
7.3.2

Reading the Program

There are four methods of reading the program saved in the IC memory card.
Read the program on the IC memory card and directly transfer it into the internal RAM
of the CPU at the same time that the power is turned on.
Use the programming tool to read the program of the IC memory card and directly trans-
fer it into the internal RAM of the CPU.
Use the "Copy File from IC Card..." of the FPWIN GR, and select one of the programs
saved in the IC memory card and read it to the FPWIN GR (memory of personal comput-
er).
Use the F14 (PGRD) instruction to read the program from the IC memory card, and di-
rectly transfer it into the internal RAM of the CPU.
Method 1: Read the program on the IC memory card and directly transfer it into the
internal RAM of the CPU at the same time that the power is turned on.
By just turning on the power of CPU, the device automatically reads the program of the
IC memory card and transfers the program to the internal RAM of the CPU.
The target of automatic reading is the program named "Autoexec.spg".
Procedure:
1.
2.
7 − 18
While the power is turned off, set the DIP switches SW2
and SW4 on the back of the CPU to on, and set the IC
memory card access enable switch to on position.
Turn on the CPU.
FP2/FP2SH