Panasonic fp2/fp2sh User Manual page 301

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9028
DT90028
(*Note)
DT9029
DT90029
(*Note)
DT9030
DT90030
(*Note)
DT9031
DT90031
(*Note)
DT9032
DT90032
(*Note)
DT9033
DT90033
(*Note)
DT9034
DT90034
(*Note)
DT9035
DT90035
(*Note)
DT9036 DT90036
DT9037 DT90037
DT9038 DT90038
DT9039 DT90039
Note) Used by the system.
Name
The value registered using programming
tool software is stored.
Sample trace
- K0: sampling triggered by F155
interval
(SMPL)/P155 (PSMPL) instruction
- K1 to K3000 (x 10ms): 10ms to 30s
The address (K constant) of a break in a
Break address
test run is stored.
Message 0
Message 1
The contents of the specified message
Message 2
are stored in these special data registers
when F149 (MSG)/P149 (PMSG)
Message 3
instruction is executed.
Message 4
Message 5
F152 (RMRD)/
The error code is stored here if F152
P152 (PRMRD)
(RMRD)/P152 (PRMRD) or F153
and
(RMWT)/P153 (PRMWT) instruction was
F153 (RMWT)/
executed abnormally.
P153 (PRMWT)
When the instruction was successfully
instructions end
executed, "0" is stored.
code
If an abnormal unit is installed to the
Abnormal unit backplane, the slot number of that unit
display will be stored. Monitor using decimal
display.
Work 1 for The number of data that match the
F96 (SRC)/ searched data is stored here when F96
P96 (PSRC) (SRC)/P96 (PSRC) instruction is
instructions executed.
Work 2 for The position of the first matching data,
F96 (SRC)/ counting from the starting 16-bit area, is
P96 (PSRC) stored here when an F96 (SRC)/P96
instructions (PSRC) instruction is executed.
F145 (SEND)/
The error code is stored here if F145
P145 (PSEND)
(SEND)/P145 (PSEND) or F146 (RECV)/
and
P146 (PRECV) instruction was executed
F146 (RECV)/
abnormally.
P146 (PRECV)
When the instruction was successfully
instructions end
executed, "0" is stored.
code
Descriptions
Read- Writ-
ing ing
A N/A
A N/A
A A
A N/A
11-33