Configuration Of Programming Tool Software; Parameters And Setting Methods - Panasonic fp2/fp2sh User Manual

Procedure Until Operation
5.2 Programming with Programming Tool Software
5.2.2

Configuration of Programming Tool Software

Depending on the PLC type and conditions of use, it is necessary to set the basic
configuration for programming tool software. Be sure to set these parameters of con-
figration before beginning programming.
5.2.2.1

Parameters and Setting Methods

Select PLC type
Select the PLC type that is being used.
Expansion memory unit used
None installed
The FP2−EM1 or FP2−EM7 is installed
The FP2−EM2, FP2−EM3, or FP2−EM6 is installed
FP2SH CPU type
FP2−C2L
FP2−C2, FP2−C2P
FP2−C3P
After your selection, you can change the PLC type.
5 − 6
Selection
FP2 16k
FP2 16k
FP2 32k
Selection
FP2SH 32k
FP2SH 60k
FP2SH 120k
FP2/FP2SH