Panasonic fp2/fp2sh User Manual page 314

FP2/FP2SH/FP10SH/FP3 (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9213 DT90213
DT9214 DT90214
DT9215 DT90215
DT9216 DT90216
DT9217 DT90217
DT9218 DT90218
DT9219 DT90219
DT9220 DT90220
DT9221 DT90221
DT9222 DT90222
DT9223 DT90223
DT9224 DT90224
DT9225 DT90225
DT9226 DT90226
DT9227 DT90227
DT9228 DT90228
DT9229 DT90229
DT9230 DT90230
DT9231 DT90231
DT9232 DT90232
DT9233 DT90233
DT9234 DT90234
DT9235 DT90235
DT9236 DT90236
DT9237 DT90237
Note) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
11-46
Name
Counts how many times a parity error is
detected.
End code receiving error
Format error
Not support error
Self-diagnostic result
Counts how many times loop change is
detected.
Available PLC: FP3, FP10SH
Counts home many times link error is
MEWNET-
W/-P link detected.
status
Counts how many times main loop break is
[W/P link 2]
detected.
(*Note)
Available PLC: FP3, FP10SH
Counts how many times sub loop break is
detected.
Available PLC: FP3, FP10SH
Loop reconstruction condition
Available PLC: FP3, FP10SH
Loop operation mode
Available PLC: FP3, FP10SH
Loop input status
Available PLC: FP3, FP10SH
Not used
-
Not used
-
Not used
-
Not used
-
Not used
-
Station number, where the send area
address for the PC link is overlapped with
this station, is stored here.
Test result in the optical transmission path
test mode for MEWNET-P link system is
MEWNET-
stored here.
W/-P link
Counts how many times a token is lost.
status
Counts how many times two or more tokens
[W/P link 3]
are detected.
(*Note)
Counts how many times a signal is lost.
Counts how many times a synchronous
abnormality is detected.
Send NACK
Send NACK
Descriptions
Read- Writ-
ing ing
A N/A
A N/A