Net Partition - Skoda SUPERB Owner's Manual

Dividing the luggage compartment
›
To divide, lift the variable loading floor by the handle
edge of the variable loading floor in the grooves
row » Fig. 155.
The variable loading floor is secured against movements in the grooves
Folding out takes place in reverse order.
The variable loading floor is divided in the same way in the upper and lower po-
sition.

Net partition

Using the net partition
Fig. 156 Open part of the roll-up luggage compartment cover / release
lever
112
Using the system
Fig. 155
Dividing the boot with variable
loading floor
and push in the rear
A
in the direction of the ar-
B
.
B
Fig. 157 Correctly secure net partition behind the front seats in the
pulled-out state
The net partition can either be pulled out and secured from behind the rear
seats or behind the front seats.
Pull out and secure the net partition behind the rear seats
›
Fold out part of the roll-up luggage compartment cover in the direction of
A
arrow » Fig. 156.
›
Pull out the net partition at the crossbar
and push forwards » Fig. 157.
D
›
Insert the crossbar on the other side of the vehicle in the mounting
same way.
›
Make sure that the crossbar is firmly seated in the two mountings
›
Fold back part of the roll-up luggage compartment cover in the opposite
A
direction of the arrow » Fig. 156.
Using the net partition behind the rear seats
›
Fold out part of the roll-up luggage compartment cover in the direction of
A
arrow » Fig. 156.
›
First pull the crossbar back slightly on the one side and then on the other
side and remove it from the mountings
›
Hold the crossbar in such a way that the net partition can slowly roll up
C
without being damaged.
›
Fold back part of the roll-up luggage compartment cover in the opposite
A
direction of the arrow » Fig. 156.
, insert in one of the mountings
C
in the
D
.
D
» Fig. 157.
D
